Free Download EPSON Adjustment Program for L130-L220-L310-L360-L365 Printers: How to Reset Waste Ink Pad Counter
EPSON Adjustment Program Reset L130-L220-L310-L360-L365 utorrent
If you own an EPSON printer of the L series, such as L130, L220, L310, L360, or L365, you might have encountered some problems with it. For example, the printer might stop working and display an error message like "Service required", "Waste ink pad full", or "Ink pad is at the end of its service life". These messages indicate that your printer has reached its limit of printing pages and needs to be reset.
EPSON Adjustment Program Reset L130-L220-L310-L360-L365 utorrent
Fortunately, there is a solution for this problem. You can use a software called EPSON Adjustment Program to reset your printer and make it work again. In this article, we will explain what EPSON Adjustment Program is, why you need to reset your printer, how to download and use EPSON Adjustment Program, and some tips and precautions for using it.
What is EPSON Adjustment Program?
EPSON Adjustment Program is a software that allows you to reset the waste ink pad counter of your EPSON printer. The waste ink pad is a part of the printer that absorbs the excess ink during printing and cleaning. Over time, the waste ink pad becomes saturated with ink and needs to be replaced or cleaned.
The printer has a built-in counter that tracks how many pages have been printed and how much ink has been used. When the counter reaches a certain limit, the printer stops working and displays an error message. This is to prevent the waste ink from overflowing and damaging the printer or your desk.
However, sometimes the counter might not reflect the actual condition of the waste ink pad. For example, if you print mostly black-and-white pages or use low-quality paper, the waste ink pad might not be as full as the counter indicates. In this case, you can use EPSON Adjustment Program to reset the counter and extend the life of your printer.
Why do you need to reset your EPSON printer?
There are several reasons why you might need to reset your EPSON printer using EPSON Adjustment Program. Some of them are:
You want to save money on buying a new printer or a new waste ink pad.
You want to avoid wasting ink by cleaning or replacing the waste ink pad unnecessarily.
You want to continue using your printer without interruption or delay.
You want to fix some errors or problems with your printer, such as paper jam, nozzle check, head cleaning, etc.
By resetting your printer using EPSON Adjustment Program, you can clear the error messages and restore your printer's functionality. However, you should also be aware of some risks and limitations of using this software. We will discuss them later in this article.
How to download and use EPSON Adjustment Program?
To download and use EPSON Adjustment Program, you need to follow these steps:
Step 1: Download the EPSON Adjustment Program from a reliable source
The first thing you need to do is to find a trustworthy website that offers the EPSON Adjustment Program for free download. You can use Google or YouTube to search for it. However, be careful not to download any malware or virus that might harm your computer or printer.
One of the websites that we recommend is this one. It provides a link to download the EPSON Adjustment Program for L130-L220-L310-L360-L365 printers from Google Drive. The file name is Resetter-L130-L220-L310-L360-L365.rar.
Step 2: Extract the file and run the program
After downloading the file, you need to extract it using a software like WinRAR or 7-Zip. You will get a folder named Resetter-L130-L220-L310-L360-L365. Inside this folder, you will find a file named Adjprog.exe. This is the program that you need to run.
Double-click on Adjprog.exe to open it. You might see a warning message from Windows Defender or your antivirus software. Click on "Run anyway" or "Allow" to proceed. You will see a window like this:
Step 3: Select your printer model and port
In this window, you need to select your printer model from the drop-down menu at the top left corner. For example, if you have an EPSON L360 printer, select L360 from the list.
Then, you need to select your printer port from the drop-down menu at the bottom right corner. This is usually Auto Selection by default. However, if you have more than one printer connected to your computer, you might need to choose the correct port manually. To do this, click on "Port" at the top right corner of the window.
You will see a window like this:
In this window, you need to find your printer name under "Printer Name". For example, if you have an EPSON L360 printer, look for "EPSON L360 Series". Then, look at the corresponding value under "Port". For example, if your printer port is USB001, write down USB001.
Then, go back to the previous window and select USB001 from the drop-down menu at the bottom right corner.
Step 4: Click on "Particular adjustment mode"
After selecting your printer model and port correctly, click on "Particular adjustment mode" at the bottom left corner of the window. You will see a window like this:
Step 5: Choose "Waste ink pad counter" and click "OK"
In this window, you need to choose "Waste ink pad counter" from the list of options under "Maintenance". This is usually located at number 8 in most cases. Then click on "OK" at the bottom right corner of the window.
You will see a window like this:
Step 6: Check the "Main pad counter" box and click "Check"
In this window, you need to check (tick) only one box under "Check / Initialization". That is the box next to "Main pad counter". Do not check any other boxes.
Then click on "Check" at the bottom right corner of the window. You will see some numbers under "Current value" and "Maximum value". These numbers indicate how much ink has been used by your printer so far.
Step 7: Click "Initialization" to reset the counter
To reset the waste ink pad counter of your printer, you need to click on " button at the bottom right corner of the window. You will see a message like this:
Click on "OK" to confirm. You will see another message like this:
Click on "OK" again. You will see a message like this:
Click on "OK" once more. You have successfully reset the waste ink pad counter of your printer.
Step 8: Turn off and on your printer
The last step is to turn off and on your printer. This will make the printer recognize the new counter value and clear the error messages. To do this, click on "Finish" at the bottom right corner of the window. Then, unplug the power cord of your printer and plug it back in after a few seconds.
Your printer should now work normally and print without any problems.
Tips and precautions for using EPSON Adjustment Program
While using EPSON Adjustment Program can be very helpful and convenient, you should also be aware of some tips and precautions for using it. Here are some of them:
Use the program only when necessary
You should not use EPSON Adjustment Program too often or unnecessarily. This is because resetting the counter does not actually remove or clean the waste ink from the pad. It only tricks the printer into thinking that the pad is empty. If you reset the counter too many times, the waste ink might overflow and damage your printer or your desk.
Therefore, you should use EPSON Adjustment Program only when you see an error message that indicates that the waste ink pad is full or near the end of its service life. You should also check the actual condition of the waste ink pad before resetting it.
Replace or clean the waste ink pad regularly
To prevent the waste ink from overflowing and causing problems, you should replace or clean the waste ink pad regularly. This will ensure that your printer works properly and efficiently.
To replace the waste ink pad, you need to buy a new one from an authorized EPSON dealer or service center. You can also order one online from websites like Amazon or eBay. The price of a new waste ink pad might vary depending on your printer model and location.
To clean the waste ink pad, you need to remove it from the printer and wash it with water and soap. You can use a pair of pliers or tweezers to pull out the pad from the bottom of the printer. Be careful not to touch the ink with your bare hands as it might stain your skin or clothes.
Use a damp cloth or paper towel to wipe away any excess ink, and be sure to wear gloves to protect your hands. Then, rinse the pad under running water until it is clean. You can also use a mild detergent or bleach to remove any stubborn stains. After washing, squeeze out any excess water and let the pad dry completely before putting it back into the printer.
Backup your printer settings before resetting
Another precaution for using EPSON Adjustment Program is to backup your printer settings before resetting it. This is because resetting might erase some of your customized settings such as paper size, print quality, color mode, etc.
To backup your printer settings, you can use a software called EPSON Printer Setting Tool. This software allows you to save and restore your printer settings easily. You can download it from this website.
To use EPSON Printer Setting Tool, you need to follow these steps:
Connect your printer to your computer via USB cable.
Run EPSON Printer Setting Tool and select your printer model from the list.
Click on "Backup" and choose a location to save your printer settings file.
Click on "OK" to start backing up your settings.
After backing up, you can use EPSON Adjustment Program to reset your printer.
If you want to restore your settings, run EPSON Printer Setting Tool again and click on "Restore".
Select your printer model and browse for your printer settings file.
Click on "OK" to start restoring your settings.
Conclusion
In conclusion, EPSON Adjustment Program is a useful software that can help you reset the waste ink pad counter of your EPSON printer and fix some errors or problems with it. However, you should also follow some tips and precautions for using it safely and effectively. You should use it only when necessary, replace or clean the waste ink pad regularly, and backup your printer settings before resetting.
By doing so, you can extend the life of your printer and enjoy its performance and quality.
FAQs
What is EPSON Adjustment Program?
EPSON Adjustment Program is a software that allows you to reset the waste ink pad counter of your EPSON printer.
Why do I need to reset my EPSON printer?
You need to reset your EPSON printer when it displays an error message that indicates that the waste ink pad is full or near the end of its service life.
How do I download and use EPSON Adjustment Program?
You can download EPSON Adjustment Program from a reliable source online and follow these steps to use it:
Select your printer model and port.
Click on "Particular adjustment mode".
Choose "Waste ink pad counter" and click "OK".
Check the "Main pad counter" box and click "Check".
Click "Initialization" to reset the counter.
Turn off and on your printer.
What are some tips and precautions for using EPSON Adjustment Program?
Some tips and precautions for using EPSON Adjustment Program are:
Use it only when necessary.
Replace or clean the waste ink pad regularly.
Backup your printer settings before resetting.
Where can I get more information about EPSON Adjustment Program?
You can get more information about EPSON Adjustment Program from these sources:
The official website of EPSON: https://epson.com/
The user manual of your EPSON printer: https://epson.com/Support/sl/s
The online forums and blogs of EPSON users: https://www.google.com/search?q=epson+adjustment+program+forum